International standard UNS N10675銆?W.Nr.2.4600銆丯S3203 Chemical composition P鈮?.03, S鈮?.03, Ni: bal., Mo: 27.0~32.0, Co鈮?.0, C鈮?.05, W鈮?.0, Fe: 1.0~3.0, Mn鈮?.0, Si鈮?.1, Cr: 1.0~3.0 Physical properties Density: 9.22g/cm3 Melting point: 1370-1418 鈩?/p> Mechanical properties Alloy and state Tensile strength Rm Mpa: 760 Yield strength Rp0.2 Mpa: 350 Elongation A%: 40% Introduction 1. Hastelloy B3 Alloy pipe is a new member of Ni-Mo alloy family. Hastelloy B3 Alloy pipe has excellent corrosion resistance to hydrochloric acid at any temperature and concentration. At the same time, Hastelloy B3 Alloy pipe has good corrosion resistance to sulfuric acid, acetic acid, formic acid, phosphoric acid and other non-oxidizing media. 2. Due to the adjustment of its chemical composition, its thermal stability has been greatly improved compared with the Hastelloy B2 Alloy pipe. Hastelloy B3 Alloy pipe has high resistance to pitting corrosion, stress corrosion, knife edge corrosion and heat affected zone corrosion. Metallographic structure Hastelloy B3 Alloy pipe has a face centered cubic structure. The content of Fe and Cr in the alloy is controlled to a minimum, which hinders the precipitation of ni4mo phase from 700 鈩?to 800 鈩? thus reducing the risk of processing embrittlement. Characteristics Hastelloy B3 Alloy pipe also has excellent resistance to pitting corrosion and stress corrosion cracking, excellent knife edge corrosion resistance and heat affected zone corrosion resistance, excellent resistance to acetic acid, acetic acid, phosphoric acid and other non-oxidizing acids, excellent resistance to hydrochloric acid corrosion at various concentrations and temperatures Hastelloy B3 Alloy pipe has been applied in the following fields Hastelloy B3 Alloy pipe can be used in all previous applications of Hastelloy B2 Alloy pipe. Like Hastelloy B3 Alloy pipe, Hastelloy B3 Alloy pipe is not recommended to be used in the environment of trivalent iron salt and divalent copper salt, because these salts will cause corrosion damage quickly. When hydrochloric acid comes into contact with iron and copper, it will react with it to form trivalent iron salt and divalent copper salt. (Note: Hastelloy the commercial brand and grade of the Haynes International, we only provide the materials according to ASTM, ASME or other International standards, the material equivalent to commercial grade)China Nickel Alloy Pipe manufacturers website:http://www.gsspipe.com/alloy-pipe/nickel-alloy-pipe/